![]() If 30 seconds is too short for you, you can use this method.ĭisconnect GPIO-16 from RST and connect it to GND. Temporary deactivation of deep sleep using a bridge You will have 30 seconds to connect to the web interface and disable deep sleep mode (you will get information on the serial port). Turn off the ESP8266 and reconnect power. There are three ways to get out of deep sleep mode: Cold start In fact, the ESP8266 is off and there is only a small timer circuit on to wake up the main core of the ESP8266 when the time comes. When deep sleep mode is active, you cannot connect to the web interface. This is a very useful mode if what we want is to do something like a door or window sensor with a magnetic sensor (which we will connect between RST and GND) and that will make the ESP8266 wake up the moment that contact closes, a few seconds or months have passed since the last time. You will have to wake up the device yourself connecting RST to GND, with a button, for example, or a simple cable. If you specify a deepsleep, 0 the ESP8266 will enter deep sleep mode without a set time to wake you up. ![]() longest sleep time is about 1 hour 11 minutes. That means it's running up to 4294 seconds, longer delays won't work. Deepsleep uses a 32-bit internal counter in uSecs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |